M5 x 12mm Countersunk Allen-Key Bolt - Marine Grade Stainless steel with locking paste The SAVAGE hanger measures 16.5' wide, which is half inch wider than the originals making this Hanger the obvious choice for the largest or hardest of riders out there! In the same breath the base of the hanger has been given an extra couple of millimeters of thickness giving huge extra structural strength & finally the SAVAGE Hanger has been S eriously Re-enforced around the kingpin area & installed with super strong SOLID 12mm CROM-MOLY Steel AXLES! With CNC cut outs & trims in all the non-critical or most importantly structural areas, increased strength over the original has been achieved whilst to save weight excess material has been removed as much as possible. The SAVAGE Hanger is also considerably beefed beefed up in all the critical areas compared to the original forged alloy spring truck. Visibly the SAVAGE Hanger looks very much the same as the regular ATB Spring Hanger, to fit to the Baseplate & connect with the springs & Barrels that need to be fitted it has to be similar, so the differences or improvements you could say are subtle, for instance instead of being produced from forged alloy the SAVAGE Hanger is produced from a solid billet a premium alloy & entirely CNC to shape, but you could not tell on the surface. Applications often require rugged terminals and lower mating force to reduce operator fatigue during assembly and/or to withstand high-mating cycles.Designed for those customers who insist on installing the very best, the strongest & highest performing equipment, well here now is TRAMPA's new 16.5 inch wide SAVAGE hanger, the best we have made yet! The pre-lubricated version can be mated up to 250 times and fit into standard Micro-Fit 3.0 Housings. Micro-Fit 3.0 RMF (Reduced Mating Force) Terminals are designed for applications needing lower engagement and disengagement forces or when the units are cycled frequently. For lower applied costs, OEMs often prefer a compliant pin connector over one that requires soldering. The Micro-Fit 3.0 CPI Header mates with Micro-Fit 3.0 Receptacle, allowing running changes as boards transition from solder to press-fit applications. The robust eye-of-the-needle design provides a reliable interface when recommended board layouts are followed. Micro-Fit 3.0 CPI (Compliant Pin) Connectors provide a compliant pin interface while maintaining all the features of the standard Micro-Fit 3.0 Connector. The TPA reduces terminal back-out by providing locking redundancy assemblers cannot insert the TPA unless terminal is properly inserted. The Micro-Fit TPA Connector Family helps prevent failure in end products by offering terminal position assurance (TPA). Doing so can cause damage to the connector and/or terminal and consume valuable labor time. In hard-to-reach applications, such as drawers or fan assembly trays, connectors need to be mated and unmated without being seen. They allow mating misalignment (per product drawing).

Micro-Fit 3.0 Blind-Mate Interface (BMI) Connectors are designed for blind-mating applications. OEMs often need power connectors in space-constrained applications. The Micro-Fit Connector Family offers up to 8.5A with a 3.00mm pitch, delivering power in a compact package in wire-to-wire and wire-to-board configurations.

Tkp housing connector wire to board